Performing Codings

NOTICE

notice

Select a vehicle first before doing any codings.

For more information about the vehicle selection read the sections Vehicle selection and CSM vehicle selection.

WARNING

warning

The ECU is not coded or is incorrectly coded

Death or severe injuries of persons due to improper or even wrong ECU operation.

Material damage of the vehicle or the ambient area

Regard the following when performing coding procedures:

1. Some working procedures require a specific training, e.g. working on the airbag.

2. Regard the window with information and instructions.

CAUTION

caution

Rolling of vehicle

Risk of injury or material damages

Proceed as follows before startup:

1. Apply the parking brake.

2. No gear is engaged.

3. Regard the window with information and instructions.

NOTICE

notice

Danger of short circuit and voltage peaks when connecting the OBD plug

Danger of destruction of automotive electronics

Switch off ignition before connecting the OBD plug to the vehicle.

Proceed as follows to perform a coding procedure:

  1. Plug in the OBD plug in the vehicle's diagnostic connector.
  2. Select Diagnostics > Codings in the App launcher.
  3. Select the requested assembly.
  4. Select the requested system.
  5. Follow the instructions on the screen and start the procedure with >Start<.
  6. Regard the window with information and instructions.
  7. Follow the instructions on the screen.