CSM Vehicle Selection

NOTICE

notice

These steps are necessary only if no CSM user has been registered before.

Proceed as follows to be able to select a vehicle with installed security system and to use the usual diagnostic processes without restrictions:

  1. Click to >Vehicle selection< in the App launcher and select the requested vehicle.

  2. CAUTION

    caution

    Rolling of vehicle

    Risk of injury or material damages

    Proceed as follows before startup:

    1. Apply the parking brake.

    2. No gear is engaged.

    3. Regard the window with information and instructions.

  3. NOTICE

    notice

    Danger of short circuit and voltage peaks when connecting the OBD plug

    Danger of destruction of automotive electronics

    Switch off ignition before connecting the OBD plug to the vehicle.

  4. Plug in the OBD plug in the vehicle's diagnostic connector.
  5. Regard the window with information and instructions.
  6. Close the info and instructions window.
  7. Select the requested diagnostic type (e.g. >Service reset<) in the app launcher.
  8. The Login window appears.
  9. Enter the CSM user data and select >Login<.
  10. Confirm the user identification with >Confirm<.
  1. The entire scope of diagnostics is available now.