Precondition for the Use of the mega macs S 20

NOTICE

The use of the mega macs S 20 requires an Internet connection.

The HG-VCI S 20 requires voltage supply while in use.

During diagnostic processes, the HG-VCI S 20 shall be permanently connected via Bluetooth® to the display unit, on which the mega macs S 20 is used.

Ensure the following to be able to use the mega macs S 20:

• The mega macs S 20 application has been installed correctly on the display unit.
• The mega macs S 20 is connected to the HG-VCI S 20 via Bluetooth® (see section Connecting to the HG-VCI S 20.