Connecting to the HG-VCI S 20

NOTICE

notice

Ensure sufficient voltage supply for the HG-VCI S 20.

The HG-VCI S 20 is a regular feature of the mega macs S 20 software and contains software components. Various functions of the mega macs S 20 software therefore require a connection to the HG-VCI S 20.

Proceed as follows to connect the HG-VCI S 20 via Bluetooth® to the display unit on which the mega macs S 20 is used:

  1. Couple HG-VCI S 20: For this search for available devices on the display unit under Bluetooth settings. Here HG_VCI_S_20XXXXXXX should appear in the list.
  2. Select HG_VCI_S_20XXXXXXX.
  1. Now, the mega macs S 20 is connected with the HG-VCI S 20 via Bluetooth®.

 

The following video shows the procedure of initial start-up step by step: Click to the button to view the video.