Searching and Installing a Wi-Fi Interface

Proceed as follows to connect the diagnostic device to a network (router) through Wi-Fi:

  1. Select > Settings.
  2. Select >Device<.
  3. Select >Wi-Fi<.
  4. Select the check box Activate Wi-Fi to view available wireless networks. The available wireless networks are displayed.
  5. The available wireless networks are displayed.
  6. Select the requested wireless network.
  7. Open the list under IP address mode with .
  8. If >Determine automatically (DHCP)< (recommended) is set, the DHCP server of the network will assign an IP address to the mega macs X automatically. This option is set ex works.
  9. If >Determine manually< is selected, enter a free network IP address, e.g. 192.168.246.002. under IP address.
  10. Select >Determine automatically (DHCP)< (recommended) or >Determine manually<.
  11. The selection will be saved automatically.
  12. Enter the Wi-Fi password.
  13. Click to >Connect<.
  14. The input will be saved automatically.
  15. The name of the selected wireless network is displayed under Connected wireless network
  16. Use to call up detailed information about the connected wireless network.
  17. Once the Wi-Fi symbol appears in the top toolbar, the online connection is set up between diagnostic device and Internet.
  1. You can use the Wi-Fi connection now.