mega macs X:

	Name
1	ON/OFF button Switch the mega macs X on and off with the ON/OFF button.
2	Special button
3	Swoosh
4	LED progress bar The LED progress bar serves for user communication and indicates the different states of the mega macs X. The different states and interactions are explained in the section User Communication.
5	OBD This LED indicates the state of charge of the vehicle battery. It can be green, yellow or red. The threshold values are: red: <11.5 V yellow: 11.5 - 11.9 V green: >12 V
6	Update This LED indicates that an update is in progress.
7	Battery status display This LED indicates the various battery charging states. The different battery status display are explained in the section User Communication.
8	PassThru This LED indicates a PassThru connection.
9	Wi-Fi This LED indicates the status of the Wi-Fi hotspots of the mega macs X. The LED will flash in green if you start the Wi-Fi hotspot. The LED will permanently light up in green if the Wi-Fi hotspot is ready. The LED will light up in red if the maximum number of Wi-Fi users of the mega macs X (max. 3 users) is reached.
10	Bluetooth® This LED indicates that the mega macs X is connected via Bluetooth®.
11	OBD plug
12	Light button Two LEDs at the OBD plug light up if you push the light button.
13	LEDs
14	Cover caps
15	Power supply socket Connect a power adapter to the power supply socket to supply the mega macs X with voltage and to charge the internal battery. It is recommended to use the enclosed charging tray for device charging.
16	Ethernet interface
17	USB interface
18	Bracket Use tha bracket to attach the mega macs X safely to the side window.
19	Charging area of the mega macs X The mega macs X can be inductively charged through the charging area.
20	LED light strip The LED light strip on the back of the mega macs X enables you to monitor the device.