Symbols in the Applications Menu

NOTICE

Some symbols become visible only if the application is listed in the favorites bar.

Symbols	Name
	Vehicle selection Use this symbol to select a vehicle or to access the Car history.
	Car history Use this symbol to call up the Car history.
	Trouble code Use this symbol to read out and delete trouble codes stored in the trouble code memory of the ECU. Information on the trouble code are available too.
	OBD diagnostics Use this symbol to start the standardized OBD2 diagnostics through emission-relevant components. Here you select merely the vehicle manufacturer and the fuel type.
	Parameter Use this symbol to view the real-time data or conditions of the components from the ECU graphically and alphanumerically.
	Actuators Use this symbol to activate or deactivate actuators with the help of the ECU.
	Basic setting Use this symbol to reset components to their basic setting.
	Coding Use this symbol to code new components in the ECU.
	Test function Use this symbol to perform special tests/self-tests.
	Service reset Use this symbol to reset the service interval. Do the service reset either manually or with the diagnostic device.
	Diagnostic Database Use this symbol to call up manufacturer-specific and vehicle-specific solutions for various issues. All suggested solutions are from the practice and are retrieved from the Hella Gutmann diagnostics database.
	Service data Use this symbol to call up e.g. vehicle-specific service data.
	Technical data Use this symbol to call up all the necessary data for service and repair work, e.g.: Tightening torques Fluid capacities Timing marks of crankshaft
	Cabin air filter Use this symbol to call up removal and installation instructions for the cabin air filter.
	Timing belt data Use this symbol to call up removal and installation instructions for timing belts and timing chains.
	Repair instructions Use this symbol to call up instructions for different types of repair work.
	Wiring diagrams Use this symbol to call up wiring diagrams of different vehicle systems, e.g.: Engine ABS Airbag Comfort
	Fuses/relays Use this symbol to call up the installation position and function of fuses and relays.
	Component test values Use this symbol to view the following information, e.g.: ECU plug Pin assignment Signal graphs Nominal values
	Diesel systems Use this symbol to call up systematic images of the injection system and exhaust gas aftertreatment.
	Component location This symbol indicates the component location.
	Battery management Use this symbol to call up removal and installation instructions as well as general information on the battery.
	Flat rate units Use this symbol to call up the flat rate units determined by the manufacturer for various work processes on the vehicle.
	Service information Use this symbol to call up important information about certain service work such as: Towing a vehicle Lifting the vehicle Emergency release of electric parking brake
	Manufacturer campaigns Use this symbol to call up vehicle-specific manufacturer campaigns.
	Recall campaigns Use this symbol to call up recall campaigns of manufacturers and importers.
	Add parameter Use this symbol to add a parameter under >Parameters<.
	Parameter added This symbol indicates that a parameter has been added under >Parameters<.
	Remove parameter Use this symbol to remove selected parameters under >Parameters<.
	Add data selection/symptom Use this symbol to add a data selection/a symptom under >New help call<.
	Delete data selection/symptom Use this symbol to delete a data selection/a symptom under >New help call<.
	Indicate selected components Use this symbol to indicate selected components under >Wiring diagrams<, >Fuses/relays< and >Diesel systems<.
	Hide selected components Use this symbol to hide selected components under >Wiring diagrams<, >Fuses/relays< and >Diesel systems<.
	Call up linked work steps Use this symbol to call up linked work steps under >Flat rate units<.
	Call up additional information Use this symbol to call up additional information under >Technical data<.
	Figure tab Under >Technical data< and >Service information< the symbol marks the tab >Images<. These images are a graphical supplement to the additional information called up.
	Read out the VIN Use this symbol to read out the VIN and to select the vehicle from the vehicle database under Vehicle selection > Vehicle search.
	Status subsystem not available This symbol indicates that the statusof the subsystem is not available under >Trouble codes<.
	Move the viewing position Use the arrows to move the viewing position of the images to the left or right or to the top or bottom.
	Original view Use this symbol to change to the original image view.
	Confirm Perform functions such as the following with this symbol: Start the selected function. Confirm the present entry. Confirm your menu selection.
	Task list corrected This symbol indicates a corrected task list under >Service data<.
	Delete Use this symbol to delete vehicle entries under >Car History<, help calls under >New help call< and trouble codes under >Trouble codes<.
	Write message Use this symbol to send a written request or message of any kind (e.g. help call) to the Hella Gutmann support of Hella Gutmann.
	Help call sent This symbol under Vehicle selection > Car History indicates that a help call has been sent.
	Help call still not read This symbol under Vehicle selection >Car History indicates that help calls are present which have not been read yet.
	Help call read This symbol under Vehicle selection > Car History indicates that a help call has been read.
	e-Mobility Use this symbol to call up additional information about electric vehicles.
	Additional information Use this symbol to view additional information under >Parameters<, vehicle information under >Vehicle selection< and component information under >Component test values<.
	ADAS Advanced Driver Assistance Systems Use this symbol to view information about the advanced driver assistance systems of the selected vehicle.
	Adaptive lighting systems Use this symbol to view information about the adaptive lighting systems of the selected vehicle.
	Expert functions in trouble codes Use this symbol to preselect and assign e.g. drivers or trouble codes under >Trouble codes<. The expert mode must be activated and an assembly must be opened in order to use the expert function.
	Start request Use this symbol to start a request under >Trouble codes<.
	Faults in trouble codes This symbol indicates a faulty status under >Trouble codes<.
	Show password
	Hide password
	Vehicle search Use this symbol to search for a vehicle e.g. through VIN, manufacturer key no. or its HGS registration number.
	Settings Use this symbol to configure the device.
	NOTE This symbol indicates that steps/actions are highlighted here to which special attention must be paid when performing work tasks (e.g. recall campaigns).

Symbols

Name

Vehicle selection

Use this symbol to select a vehicle or to access the Car history.

Car history

Use this symbol to call up the Car history.

Trouble code

Use this symbol to read out and delete trouble codes stored in the trouble code memory of the ECU. Information on the trouble code are available too.

OBD diagnostics

Use this symbol to start the standardized OBD2 diagnostics through emission-relevant components. Here you select merely the vehicle manufacturer and the fuel type.

Parameter

Use this symbol to view the real-time data or conditions of the components from the ECU graphically and alphanumerically.

Actuators

Use this symbol to activate or deactivate actuators with the help of the ECU.

Basic setting

Use this symbol to reset components to their basic setting.

Coding

Use this symbol to code new components in the ECU.

Test function

Use this symbol to perform special tests/self-tests.

Service reset

Use this symbol to reset the service interval. Do the service reset either manually or with the diagnostic device.

Diagnostic Database

Use this symbol to call up manufacturer-specific and vehicle-specific solutions for various issues.

All suggested solutions are from the practice and are retrieved from the Hella Gutmann diagnostics database.

Service data

Use this symbol to call up e.g. vehicle-specific service data.

Technical data

Use this symbol to call up all the necessary data for service and repair work, e.g.:

Tightening torques
Fluid capacities
Timing marks of crankshaft

Cabin air filter

Use this symbol to call up removal and installation instructions for the cabin air filter.

Timing belt data

Use this symbol to call up removal and installation instructions for timing belts and timing chains.

Repair instructions

Use this symbol to call up instructions for different types of repair work.

Wiring diagrams

Use this symbol to call up wiring diagrams of different vehicle systems, e.g.:

Engine
ABS
Airbag
Comfort

Fuses/relays

Use this symbol to call up the installation position and function of fuses and relays.

Component test values

Use this symbol to view the following information, e.g.:

ECU plug
Pin assignment
Signal graphs
Nominal values

Diesel systems

Use this symbol to call up systematic images of the injection system and exhaust gas aftertreatment.

Component location

This symbol indicates the component location.

Battery management

Use this symbol to call up removal and installation instructions as well as general information on the battery.

Flat rate units

Use this symbol to call up the flat rate units determined by the manufacturer for various work processes on the vehicle.

Service information

Use this symbol to call up important information about certain service work such as:

Towing a vehicle
Lifting the vehicle
Emergency release of electric parking brake

Manufacturer campaigns

Use this symbol to call up vehicle-specific manufacturer campaigns.

Recall campaigns

Use this symbol to call up recall campaigns of manufacturers and importers.

Add parameter

Use this symbol to add a parameter under >Parameters<.

Parameter added

This symbol indicates that a parameter has been added under >Parameters<.

Remove parameter

Use this symbol to remove selected parameters under >Parameters<.

Add data selection/symptom

Use this symbol to add a data selection/a symptom under >New help call<.

Delete data selection/symptom

Use this symbol to delete a data selection/a symptom under >New help call<.

Indicate selected components

Use this symbol to indicate selected components under >Wiring diagrams<, >Fuses/relays< and >Diesel systems<.

Hide selected components

Use this symbol to hide selected components under >Wiring diagrams<, >Fuses/relays< and >Diesel systems<.

Call up linked work steps

Use this symbol to call up linked work steps under >Flat rate units<.

Call up additional information

Use this symbol to call up additional information under >Technical data<.

Figure tab

Under >Technical data< and >Service information< the symbol marks the tab >Images<. These images are a graphical supplement to the additional information called up.

Read out the VIN

Use this symbol to read out the VIN and to select the vehicle from the vehicle database under Vehicle selection > Vehicle search.

Status subsystem not available

This symbol indicates that the statusof the subsystem is not available under >Trouble codes<.

Move the viewing position

Use the arrows to move the viewing position of the images to the left or right or to the top or bottom.

Original view

Use this symbol to change to the original image view.

Confirm

Perform functions such as the following with this symbol:

Start the selected function.
Confirm the present entry.
Confirm your menu selection.

Task list corrected

This symbol indicates a corrected task list under >Service data<.

Delete

Use this symbol to delete vehicle entries under >Car History<, help calls under >New help call< and trouble codes under >Trouble codes<.

Write message

Use this symbol to send a written request or message of any kind (e.g. help call) to the Hella Gutmann support of Hella Gutmann.

Help call sent

This symbol under Vehicle selection > Car History indicates that a help call has been sent.

Help call still not read

This symbol under Vehicle selection >Car History indicates that help calls are present which have not been read yet.

Help call read

This symbol under Vehicle selection > Car History indicates that a help call has been read.

e-Mobility

Use this symbol to call up additional information about electric vehicles.

Additional information

Use this symbol to view additional information under >Parameters<, vehicle information under >Vehicle selection< and component information under >Component test values<.

ADAS Advanced Driver Assistance Systems

Use this symbol to view information about the advanced driver assistance systems of the selected vehicle.

Adaptive lighting systems

Use this symbol to view information about the adaptive lighting systems of the selected vehicle.

Expert functions in trouble codes

Use this symbol to preselect and assign e.g. drivers or trouble codes under >Trouble codes<. The expert mode must be activated and an assembly must be opened in order to use the expert function.

Start request

Use this symbol to start a request under >Trouble codes<.

Faults in trouble codes

This symbol indicates a faulty status under >Trouble codes<.

Show password

Hide password

Vehicle search

Use this symbol to search for a vehicle e.g. through VIN, manufacturer key no. or its HGS registration number.

Settings

Use this symbol to configure the device.

NOTE

This symbol indicates that steps/actions are highlighted here to which special attention must be paid when performing work tasks (e.g. recall campaigns).