Battery Diagnostics

Here you can test a battery using the BPC-Tool or import a test result from the BPC-Tool into the Car History.

You are given an overview of the following functions:

• >System test<
• Here you can perform a system test using the BPC-Tool. The following is displayed during the system test:
• Battery test with battery state of charge and state of health
• Starter test with voltage and current intensity when starting the internal combustion engine
• Alternator test with voltage and current intensity when the power consumer is switched on and switched off
• No-load current test
• >Import result (system test)<
• Here you can import the most recent system test into the Car History.
• >Battery test<
• Here you can perform a battery test using the BPC-Tool. The battery state of charge and state of health are tested.
• >Import result (battery test)<
• Here you can import the most recent battery test into the Car History.