Global Check, Trouble Code Clearing

Here you can clear all the trouble codes stored in the ECUs.

NOTICE

notice

The stored trouble codes cannot be retrieved any more after global check with trouble code deletion. Therefore, it is recommended to perform the global check with trouble code reading first.

Proceed as follows to perform the global check with trouble code deletion:

  1. Perform steps 1 to 10 as described in section Global Check, Reading Trouble Codes.

  2. NOTICE

    notice

    Clearing all trouble codes in all vehicle systems is possible only if all systems can be read out with the same OBD plug.

  3. Delete all trouble codes in the bottom toolbar with .
  4. Regard the window with information and instructions.
  5. Confirm the window with infos and instructions with .
  6. Observe the information window.
  7. Confirm the info window with .
  8. All saved trouble codes will be deleted.