Vehicle selection

Here you can select vehicles according to the following parameters:

NOTICE

notice

To be able to access all the available information, you must have an internet connection.

Proceed as follows to select a vehicle:

  1. Select >Vehicle selection< in the main menu.
  2. Select >i<.
  3. Activate the check box for passenger cars, for motorcycles, or for trucks.
  4. Select Vehicle database with , or .
  5. Select the requested manufacturer.
  6. Select the requested fuel type.
  7. Select the requested model.
  8. Double-click to the requested vehicle type.
  9. The Vehicle data menu appears.
  10. Here you can enter either the registration number or the customer name (max. 10 characters).
  11. Open the virtual keypad with .

  12. NOTICE

    notice

    If you do not enter a registration number or the customer name, the device does not store any data of the current vehicle in the Car History.

    One registration number or customer name can be used for several vehicles.

  13. Enter the registration number or customer name.
  14. Click 2x to to confirm the input.
  15. The input will be saved automatically.
  1. Vehicle selection is now ready for >Diagnostics< and >Vehicle data< and the data will be stored in the >Car history<.
  2. The mega macs PC SE software switches automatically back to the main menu.