Starting a BPC-Tool Update

Proceed as follows to start the BPC Tool update:

  1. Connect the BPC-Tool to the battery.
  2. Select Settings > Interfaces.
  3. Select >BPC<.

  4. NOTICE

    notice

    Insufficient voltage supply

    System data loss

    Do not switch off the PC and the BPC-Tool during the update and do not disconnect both from voltage supply.

    Ensure sufficient voltage supply.

  5. Start BPC-Tool update with .
  6. Regard the window with information and instructions.
  7. Confirm the window with infos and instructions with .
  8. Update of the BPC-Tool will start. The device searches for a new update that will then be downloaded and installed.
  1. The message BPC-Tool update successful. appears if the update was successful.