Search for a BPC-Tool

Proceed as follows to search for a BPC-Tool:

  1. Switch on the BPC-Tool and connect it with the mega macs PC SE software (see operating instructions of the BPC-Tool).
  2. Select Settings > Interfaces.
  3. Select >BPC<.
  4. Push to Search for BPC-Tool.
  5. Observe the information window.
  6. Confirm the info window with .
  7. The connection to the BPC-Tool is established.
  8. Once the connection between the mega macs PC SE software and the BPC-Tool has been set up successfully, a drop-down list of the BPC-Tools that have been found is displayed.
  9. Select the required BPC-Tool.
  10. The selection will be saved automatically.
  11. The selected BPC-Tool address is displayed in the field BPC address.