Starting the Software Update

Here you can start the software updates.

Proceed as follows to start the software update:

  1. Select Settings > Update in the main menu.
  2. Select >System<.
  3. Open the list under Step with .
  4. Select >Update<.

  5. NOTICE

    notice

    Insufficient voltage supply

    System data loss

    Do not switch off the PC and the HG-VCI PC during the software update and do not disconnect both from voltage supply.

    Ensure sufficient voltage supply.

  6. Start Update with .
  7. The device searches for a new update that will then be downloaded and installed.
  1. The mega macs PC SE software will be finished automatically upon a successful software update. The installation will be checked automatically after startup.