Executing the mega macs PC SE Software
NOTICE
When putting the product into operation for the first time and after every software update, you need to confirm the general terms and conditions (GTC) of the Hella Gutmann Solutions GmbH. Otherwise, certain device functions will be unavailable.
The first time the device is started you need to confirm also the order processing agreement of the Hella Gutmann Solutions GmbH. This contract governs the handling of personal data pursuant to the GDPR.
NOTICE
When starting the software for the first time, you need to couple the mega macs PC SE software with the HG-VCI PC. This requires the mega macs PC SE software to be connected to the HG-VCI PC via USB cable. A Bluetooth® connection is sufficient when starting up in the future.
Proceed as follows to execute the mega macs PC SE software:
- Connect the PC and the HG-VCI PC with the USB cable.
- Select > > > > .
- The mega macs PC SE software will be started.
- The GTCs appear.
- Read the GTCs and confirm them at the end of the text.
- A user selection window appears. The user name is saved for all data stored in the Car History. This enables quicker identification of the mechanic who performed the repair work if a query is subsequently made.
- Double-click
. - Enter the user name.
- Confirm your entry with
. - Activate the Stay logged in check box if necessary.
- If the Stay logged in check box is activated, you will not need to select a user name when switching on in the future.
- The order processing agreement is indicated.
- Read the order processing agreement, then confirm it and agree to it at the end of the text.
- Confirm your entry with .
- The input will be saved automatically.
- Disconnect the USB cable from HG-VCI PC and PC.
- Insert the Bluetooth® adapter into the USB port of the PC.
- Once the PC recognized the Bluetooth® adapter the LED becomes blue.
- The main menu appears.
- Now you can work with the mega macs PC SE software.