Performing Cost Estimates
NOTICE

To perform cost estimates, enter at least 1 hourly rate and the VAT rate under
> > (see section Creating Cost Estimates).Proceed as follows to perform a cost estimate:
- Select >Applications< in the main menu.
- Select Cost estimates with
.
- Add a new cost estimate with
.
- Observe the info window.
- Close the info window with
.
- Open the selection window under First registration with
.
- Open the list under Day with
.
- Select the day of the first registration.
- Repeat steps 7 and 8 for Month and Year.
- Confirm the selection with
.
- Open the virtual keypad under Odometer reading with
.
- Enter the odometer reading.
- Confirm your entry with
.
- Repeat steps 6 to 8 for the Vehicle safety and emissions inspection date.
- Confirm the selection with
.
- Add a new cost estimate with
.
- Data download is in progress.
- Select the requested category.
- Data download is in progress.
- Select the required subcategory.
- Data download is in progress. A list with working steps appears.
- The tasks that are indicated in bold letters contain single working steps. These can be displayed by clicking the bold text.
- Activate the check box for the required work.
- Confirm the selection with
.
- A cost estimate is displayed.
- Open the list under Hourly rate unit price with
.
- Select the required hourly rate.
- Perform steps 19 and 20 for each additional working position.
- The calculated cost estimate is displayed.
- Add further working steps with
.
- Delete working steps from the cost estimate with
.
- Save the cost estimate with
.
- The cost estimate is saved to the vehicle currently selected in the Car History.