Performing Cost Estimates

NOTICE

notice

To perform cost estimates, enter at least 1 hourly rate and the VAT rate under Settings > Company > Cost estimate (see section Creating Cost Estimates).

Proceed as follows to perform a cost estimate:

  1. Select >Applications< in the main menu.
  2. Select Cost estimates with .
  3. Add a new cost estimate with .
  4. Observe the info window.
  5. Close the info window with .
  6. Open the selection window under First registration with .
  7. Open the list under Day with .
  8. Select the day of the first registration.
  9. Repeat steps 7 and 8 for Month and Year.
  10. Confirm the selection with .
  11. Open the virtual keypad under Odometer reading with .
  12. Enter the odometer reading.
  13. Confirm your entry with .
  14. Repeat steps 6 to 8 for the Vehicle safety and emissions inspection date.
  15. Confirm the selection with .
  16. Add a new cost estimate with .
  17. Data download is in progress.
  18. Select the requested category.
  19. Data download is in progress.
  20. Select the required subcategory.
  21. Data download is in progress. A list with working steps appears.
  22. The tasks that are indicated in bold letters contain single working steps. These can be displayed by clicking the bold text.
  23. Activate the check box for the required work.
  24. Confirm the selection with .
  25. A cost estimate is displayed.
  26. Open the list under Hourly rate unit price with .
  27. Select the required hourly rate.
  28. Perform steps 19 and 20 for each additional working position.
  29. The calculated cost estimate is displayed.
  30. Add further working steps with .
  31. Delete working steps from the cost estimate with .
  32. Save the cost estimate with .
  33. The cost estimate is saved to the vehicle currently selected in the Car History.