Safety Precautions for the HG-VCI PC

Observe the following to avoid incorrect handling and injury to the user or destruction of the HG-VCI PC arising from this:

  • Ensure that the HG-VCI PC is not being touched during the communication with the diagnostic device (keep a minimum distance of 20 cm).
  • Protect the HG-VCI PC from long periods of exposure to solar radiation.
  • Protect the HG-VCI PC from hot components.
  • Protect the HG-VCI PC from rotating parts.
  • Regularly check connecting cables/accessory parts for damage (destruction of the HG-VCI PC due to short circuit).
  • Use the HG-VCI PC only in accordance with these instructions.
  • Protect the HG-VCI PC from fluids such as water, oil or gasoline. The HG-VCI PC is not watertight.
  • Protect the HG-VCI PC from strong impacts and do not drop it.
  • Do not open the HG-VCI PC on your own. Only technicians authorized by Hella Gutmann are allowed to open the HG-VCI PC. Warranty and guarantee will be rendered void at any case of unauthorized tampering of the device or if the protective seal is damaged.
  • If the HG-VCI PC is not working properly, contact Hella Gutmann or a Hella Gutmann trading partner without delay.