Pairing Laser Distance Meters for Measurements from Wheel Center

Proceed as follows to pair the laser distance meters for the distance measurements from the wheel center:

  1. Open the CSC-Tool Digital (2023) app.
  2. Select Distance > Wheel center in the main menu.
  3. Switch off all laser distance meters.
  4. Select Pair left device.
  5. The corresponding instructions appear on the projection screen.
  6. Switch on the left laser distance meter.
  7. Take the left laser distance meter out of the mount and place it on the Apple TV.
  8. The following message is indicated: Pairing successful.
  9. Confirm the pairing confirmation with OK.
  10. The status indicator shows the message: Device connected.
  11. Insert the laser distance meter again into the mount and switch it off.
  12. Repeat steps 1 to 9 for the right laser distance meter.
  1. The laser distance meters are ready for use now.