Wheel Clamp Module WA (Optional)
52 | Handle (Transport the wheel clamp module WA easily with this handle.) | 53 | Attachment bracket for vehicles (Use it to attach the wheel clamp module WA to the tire.) |
54 | Contact cylinder (Use the contact cylinder to correctly position the wheel clamp module WA against the tire or the rim.) | 55 | Lasere module (Use the laser to project the real value to the scale of the cross member.) |
56 | Contact cylinder (Use the contact cylinder to correctly position the wheel clamp module WA against the tire or the rim.) | 57 | Set screw shaft with cross connector (Use this set screw to adjust the height of the shaft with the cross connector.) |
58 | Contact cylinder (Use the contact cylinder to correctly position the wheel clamp module WA against the tire or the rim.) |
59 | Level gauge (Use the level gauge to check whether the laser module is positioned horizontally.) | 60 | Scale of wheel clamp module WA (Here you can read values for the check and axle alignment.) |
61 | Laser beam output (The laser beam comes out here. Use the laser beam to read the actual value at the scales of the cross member and at the wheel clamp module WA.) | 62 | Mounting bolt (Use it to adjust and fix the laser module.) |
63 | Level gauge (Use the level gauge to check whether the laser module is positioned horizontally.) | 64 | Switch (Switch the laser on and off.) |
65 | Battery compartment cover (Insert two batteries type AA here.) | 66 | Level gauge (Use the level gauge to check whether the laser module is positioned vertically.) |