Safety Precautions for the CSC-Tool Digital


In order to avoid incorrect handling and injury to the user or destruction of the CSC-Tool Digital (2023) arising from this, pay attention to the following: The assembly and the initial startup of the CSC-Tool Digital (2023) shall only be done by a service partner trained and authorized by Hella Gutmann. Always unload the product together with a second person and use suitable aids if necessary. Only use the intended handles for moving the CSC-Tool Digital (2023). The handles are not to be intended for carrying the CSC-Tool Digital (2023) and they are not suited to lift the device. Once the CSC-Tool Digital (2023) is damaged, the proper alignment of the vehicle is not longer ensured. In this case the CSC-Tool Digital (2023) must not be used any more and warranty and guarantee will become void. The CSC-Tool Digital (2023) shall only be moved when fully retracted. The CSC-Tool Digital (2023) shall be protected against rolling by tightening the locking screws. The proper setting of the CSC-Tool Digital (2023) shall be ensured prior to every camera calibration of a vehicle. For this check whether the labeled testing points match the reference marks on the prevailing digital reference panel. Protect the CSC-Tool Digital (2023) from fluids such as water, oil or gasoline. The CSC-Tool Digital (2023) and the corresponding components are not waterproof. Do not open the CSC-Tool Digital (2023). Only technicians authorized by Hella Gutmann are allowed to open the tool. Service work of the projector, the laser distance meters and the Apple TV shall only be done in accordance with the instructions in the appropriate original instructions. In case of malfunctions or necessary calibration work and repair steps of the CSC-Tool Digital (2023) please contact a technician or trading partner of Hella Gutmann.

In order to avoid incorrect handling and injury to the user or destruction of the CSC-Tool Digital (2023) arising from this, pay attention to the following:

The assembly and the initial startup of the CSC-Tool Digital (2023) shall only be done by a service partner trained and authorized by Hella Gutmann.
Always unload the product together with a second person and use suitable aids if necessary.
Only use the intended handles for moving the CSC-Tool Digital (2023).
The handles are not to be intended for carrying the CSC-Tool Digital (2023) and they are not suited to lift the device.
Once the CSC-Tool Digital (2023) is damaged, the proper alignment of the vehicle is not longer ensured. In this case the CSC-Tool Digital (2023) must not be used any more and warranty and guarantee will become void.
The CSC-Tool Digital (2023) shall only be moved when fully retracted.
The CSC-Tool Digital (2023) shall be protected against rolling by tightening the locking screws.
The proper setting of the CSC-Tool Digital (2023) shall be ensured prior to every camera calibration of a vehicle. For this check whether the labeled testing points match the reference marks on the prevailing digital reference panel.
Protect the CSC-Tool Digital (2023) from fluids such as water, oil or gasoline. The CSC-Tool Digital (2023) and the corresponding components are not waterproof.
Do not open the CSC-Tool Digital (2023). Only technicians authorized by Hella Gutmann are allowed to open the tool.
Service work of the projector, the laser distance meters and the Apple TV shall only be done in accordance with the instructions in the appropriate original instructions.
In case of malfunctions or necessary calibration work and repair steps of the CSC-Tool Digital (2023) please contact a technician or trading partner of Hella Gutmann.